Solutions

Seawater Desalination

Converting seawater and brackish water into drinking- and process-grade water with high-pressure SWRO and low/medium-pressure BWRO systems.

What is it?

Seawater desalination converts seawater and brackish water into drinking- and process-grade water with high-pressure SWRO and low/medium-pressure BWRO membrane systems. Energy recovery devices (ERD) keep specific energy consumption low.

Technical Scope

  • SWRO / BWRO membrane systems
  • Energy recovery devices (ERD)
  • Pre-treatment & UF packages
  • Remineralisation unit

Specifications

Feed TDS35,000 – 45,000 ppm (sea)
Recovery40% – 50% (SWRO)
Specific energy~3.0 kWh/m³ (with ERD)
Capacity50 – 20,000+ m³/day

Typical Process Flow

  1. 01 Seawater intake & screening
  2. 02 Pre-treatment (UF / DMF)
  3. 03 High-pressure pump + ERD
  4. 04 SWRO membrane stage
  5. 05 Remineralisation & storage

Frequently Asked Questions

What is the difference between SWRO and BWRO?

SWRO is for seawater (high salinity, high pressure); BWRO is for brackish/well water (lower salinity).

How do you lower energy use?

Pressure-exchanger ERDs recover energy from the concentrate stream, bringing specific energy down to ~3 kWh/m³.

Is the product water potable?

Yes; a remineralisation stage brings it to WHO/TS 266 drinking-water standard.

Get a Quote

Quick Quote Request

Tell us about your project in a few lines; our engineers will respond with a tailored proposal.