7 Sand Filters Shipped to a Steel Rolling Mill in Morocco
Seven Ø4000 mm sand filters and PLC automation panels, built for the cooling
water systems of a Moroccan steel mill, are on their way.
Manufacturing
is complete on our cooling water filtration project for a steel rolling mill in
Morocco. The 7 × Ø4000 mm sand filters and two PLC automation panels were
loaded onto lowbed trailers on 20–21 October 2026 and are now on their way to
Morocco.
The
filters will serve two separate cooling circuits at the mill:
·
Wire rod line: 700 m³/h, 4 filters
·
Rolling mill cooling circuit: 400 m³/h, 3
filters
The
Ø4000 × 4200 mm vessels are fabricated from E24 (ST-37) steel, with an
anti-corrosion internal lining and an epoxy external coating. Fitted with 0.5
mm slotted plastic nozzles, the filters deliver 30–50 micron filtration at an
operating pressure of 4 bar.
Each
system runs on its own stand-alone automation panel with a Siemens S7-1200 PLC
and a 7" HMI. Backwash sequences, valve positions, differential pressure
and air blowers are monitored and controlled by the PLC.
The
project is delivered in collaboration with our strategic engineering partner,
Aquamatch. Next up: on-site installation and commissioning. We'll keep sharing
updates as the project moves forward.